HXE-450/13DL Copper rod breakdown machine
I. Quick Details
HXE-450/13DL Copper rod breakdown machine is used to draw single bare copper wire from 8mm to 1.2mm-4.5mm.The drawing capstans are arranged in a line that are able to work continuously with drawing speed and electrical control can be matched with each other.
II. Componenets of equipment
| Name | Quantity |
| 1. Cantilever Pay-off shelf | 1 |
| 2. HXE-450/13DL Main drawing machine | 1 |
| 4. HXE-180 Tension controller | 1 |
| 6. HXE-SX630 Double spoolers | 1 |
| 7. Electrical cabinet | 1 |
| 8. Operation panel / With PLC&Touching screen | 1 |
III. Main technical parameters
| 1. Inlet | 8mm |
| 2. Outlet | 1.2mm-4.0mm |
| 3. Diameter of capstans | 450mm |
| 4. Speed | 1500m/min, Capacity say 1.2mm, 780kg per hour |
| 5. Slip ratio | 1.4-1.2 decrease |
| 6. Quantity of capstan | 13 |
| 7. Capstan | Tungsten carbide (With wire threading function) |
| 8. Quick dies change | Available / Require less dies |
| 9. Main motor | DC280KW, with DC Controller |
| 10. Fix speed motor | DC75KW, with DC Controller |
| 11. Gear | Changeable |
| 12. Noises of machine | ≤85 db |
| 13. Protection cover | Motor transmission cover installed |
| 14. Others | Heat exchanger for Gear oil is provided |
| 15. Others | All main pipes are provided |
| 16. Others Gear oil station system is provided, including: Pump, Gear oil tank, Pipes, Oil Pressure Gauge, Signal wire. |
| 17. Others Heat exchanger for Lubrication oil and Heat exchanger for cooling water, no need. You need prepare one Underground Tank for Lubrication Oil recycle, one Water Tower for Cooling Water recycle. |
IV. Working Environment
4-1. Not more than 1000 meters above sea level.
4-2. Temperature －10℃－40℃
4-3. Relative temperature does not exceed 85% (25 ℃)
V. After sale service
Warranty: after shipping, machine part one year, electrical parts six months
Under these situation mentioned, the Seller will not take responsibility, but if the Buyer agree, will charge fees accordingly to repair the machine.
A. Due to wrong operation while shipping.
B. Due to Buyer`s wrong preparation that may cause damage to the machine.
C. Due to Buyer`s wrong operation that may cause damage to the machine.
D. Not in the consuming part list.
E. After agreement are made for the shipping, for any damage, Buyer should inform Seller in letter form to repair in seven days, If beyond the dare, Seller shall take no responsibility.
F. For any other failures due to acts of God (such as lightning, typhoon, earthquake, riots, war, fire or flood) and other factors that will cause damage, Seller shall take no responsibility.
G. Seller guarantee provide long term support regarding the parts and teach. After warranty, will charge accordingly.
VI. Lifting the machine, installation, adjustment
6-1. Lifting, there are four lifting rings to lift.
6-2. Installation, please check the external drawing and foundation drawing of the machine, dig the ground, put the machine in position, check the horizontal level, adjust the ground screws, put concrete slurry, after dry and fix, check the horizontal level again, then fix the machine by the ground screws.
6-3. Adjustment, clean all parts, check all the part no loose.
Product Tags:
|
|
High Reliability Drum Copper Rod Drawing Machine 13DL 280KW With 450mm Capstan Images
|
